Vibrowest Sieving Equipment

Vibrowest Bag Dumping Station

Vibrowest Bag Dumping Station MSCR

Bag dumping station MSCR model is used for safety screening in order to avoid any contamination due to possible presence of foreign bodies into the raw material sacks/bags. Manual bag dumper station with built-in safety screening vibrating sieve and integrated dust extraction. Fume extraction hood, sacks support grid and mesh screen removable for easy & fast cleaning.

The Bag dumping station MSCR provides a simple means of introducing sack products and check sieving them into a system. The sack tip and sieve are avaiable in different sizes for ease of cutting and handling of bags. The flip-top powered lid enables ease of opening of the sack tip for access to the screen and cleaning. The sieve unit below has a self-cleaning silicone diaphragm to give a dust-tight closure. The whole unit is ergonomically designed for satisfaction in operation. The outlet of the station may be connected to mechanical and pneumatic conveyor systems, or simply connected to a mixer inlet or other process equipment. Other features include no-tool quick change of screens and an easy-clean design with no crevices.

Features and plus:

easy to disassemble;

possibility to connect a dust extraction;

possibility to install a magnetic iron remover of 16.000 gauss;

removable grid;

available with ATEX certi­fication, FDA IQ-OQ, GMP procedures;

available Jacob fittings and fi­nishes for the food and pharmaceutical industry 

For further information on our range of Sieves contact Total Food Machines on 02890 994 202 or email sales@totalfoodmachines.com 

Vibrowest Centrifugal Sifter

Vibrowest Sieving Centrifugal Sifter TURBOWEST

The centrifugal sifter TURBOWEST is particularly suitable for control sieving of solid products. The centrifugal sieve sturdy construction and ease of integration into existing plants, makes it an easy choice for sieving a large range of powders and granules, food, chemical, pharmaceutical and plastic products. 

Successfully used for screening dry or damp bulk materials, the centrifugal sifter, is recommended whenever bagged products or hygroscopic materials are being processed. Lumps and conglomerations are broken gently without any product loss. The Turbowest sieve is especially suited for gravity screening in line with pneumatic conveyors.

DESCRIPTION

The product is fed into the sifter trough the inlet and the internal screw feeds material to be sifted into the sifting chamber. The materials is collected and distributed along the sifting surface by rotating paddles optional brushes, which forces the material through the screen.

Material feeding must be consistent avoiding any overfeeding. The separated fine material will discharge to the central outlet. The central outlet is easily connected to any conveying system. The unsifted material will be discharged through the side outlet which is easy to connect to any conveying system.

Features and plus:

gentle material handeling;

robust construction;

automatic material discharge;

no vibration;

easy and quick change of screen mesh;

inspection doors for quick cleaning of the machine;

high output;

available in stainless steel AISI 304L-316L;

energy efficient;

available with ATEX certi­fication, FDA IQ-OQ, GMP procedures;

available Jacob fittings and fi­nishes for the food and pharmaceutical industry.

For further information on our range of Sieves contact Total Food Machines on 02890 994 202 or email sales@totalfoodmachines.com 

Vibrowest MR Sieving Machine

Vibrowest  Circular vibrating Sieve MR is used for the separation, classi­fication, scalping, dedusting and selection of powders and liquids. 

Ideal for sieving milk powders, whey, sugars, flours, tea leaves, herbs and confectionary

The Sieve can  achieve up to 5 different particle sizes, very robust construction and easy to disassemble.                                                                                                                                                                                                                                               

The Vibrowest MR Sieve is available in the following models: 16″ (Ø 400 mm) – 24″ (Ø 600 mm) – 30″ (Ø 800 m) – 36″ (Ø 900 mm) – 48″ (Ø 1200 mm) – 60″ (Ø 1500 mm) – 72″ (Ø 1800 mm) – 90″ (Ø 2200 mm).

DESCRIPTION

Vibration is through an unbalanced motor with a double extended shaft, fitted at both ends with eccentric weights. 

The top weight on the motor shaft rotates in a plane close to the center of the mass of assembly.

 Rotation of the top eccentric weights creates vibration in the horizontal plane, which causes material to move across the screen cloth to periphery increasing the horizontal throw, causing oversize material to discharge at a faster rate.

The bottom eccentric weight rotates below the center of mass creating tilt on the screen giving vibration in vertical and tangential plane. Increasing the vertical component of motion, this promotes turnover of material on the screen surface helping maximum quantity of under size material to pass through the screen. 

Rugged Springs placed over the circular motor base amplifies the vibration. 

The top weight on the motor shaft rotates in a plane close to the centre of the mass of assembly. 

Rotation of the top eccentric weight creates vibration in the horizontal plane which causes material to move across the screen cloth to periphery. Increasing the top eccentric mass, increases the horizontal throw, causing oversize material to discharge at a faster rate. 

The bottom eccentric weight rotates below the centre of mass, creating tilt on the screen, giving vibration in vertical & tangential planes. Increasing the vertical component of motion, this promotes turnover of material on the screen surface helping maximum quantity of under size material to pass through the screen. 

The vertical motion also minimizes blinding of screen by “near size” particles. The tangential component of motion is controlled by the angle of lead given to bottom weights with relation to top weight. Variation in lead angle controlled the spiral pattern of material travel over the screen cloth. 

Speed & flow pattern of material travel over the screen cloth can be set by the operator for maximum throughout & screening efficiency for any screen able product, wet or dry, coarse or fine, heavy or light, hot or cold. 

Typical material passes rapidly through the screen during its travel to the periphery. The oversize material get continuously discharged through a tangential outlet.

Features and plus: 

low power consumption;

varied range of applications;

high throughput per screen area;

accurate separation up to 5 fractions;

screening up to 230 mesh;

applicable different anti blinding systems applicable;

Modular design allows easy cleaning and maintenance;

dust-tight and low noise processing;

available with ATEX certifi­cation, FDA IQ-OQ, GMP procedures;

Jacob fittings and fi­nishes available for the food and pharmaceutical industry

For further information on our range of Sieves contact Total Food Machines on 02890 994 202 or email sales@totalfoodmachines.com 

Vibrowest MSC Sieving Equipment

Vibrowest Sieving machine MSC

This screening machine Vibrowest MSC is a round separator used for the safety screening and check screening of powders and liquids by removing the oversize contamination.            

Available in the following models: 16″ (Ø 400 mm) – 20″ (Ø 500 mm) – 24″ (Ø 600 mm) – 30″ (Ø 800 m) – 36″ (Ø 900 mm) – 48″ (Ø 1200mm ) – 60″ (Ø 1500 mm) – 72″ (Ø 1800 mm) – 90″ (Ø 2200 mm).

DESCRIPTION

the vibration is through a twin unbalanced motors with a double extended shaft, fitted at both ends with eccentric weights. The rotation of the top and bottom eccentric weights creates vibration in the horizontal plane, which causes material to move across the screen cloth to periphery increasing the horizontal throw, causing oversize material to discharge at a faster rate. Increasing the eccentric mass, increases the horizontal throw, causing oversize material to discharge at a faster rate. Rugged Springs placed over the circular motor base amplifies the vibration. By increasing the vibration and motion, this promotes turnover of material on the screen surface helping maximum quantity of under size material to pass through the screen. The vertical motion also minimizes blinding of screen by “near size” particles. The tangential component of motion is controlled by the angle of lead given to bottom weights with relation to top weight. Variation in lead angle controlled the spiral pattern of material travel over the screen cloth. Speed and flow pattern of material travel over the screen cloth can be set by the operator for maximum throughout & screening efficiency for any screen able product, wet or dry, coarse or fine, heavy or light, hot or cold. Typical material passes rapidly through the screen during its travel to the periphery. The oversize material get continuously discharged through a tangential outlet.

Features and plus:

eliminate oversized and purify material;

higher throughput per unit mesh area;

easily to dismantle and clean;

dust proof;

can fit easily into existing installations and areas of limited headroom;

lowers noise levels  typically as 70dBA;

available with ATEX certifi­cation, FDA IQ-OQ, GMP procedures;

available Jacob fittings and fi­nishes for the food and pharmaceutical industry.

For further information on our range of Sieves contact Total Food Machines on 02890 994 202 or email sales@totalfoodmachines.com